المعلمات التقنية الرئيسية للمنتج
CA6180 Horizontal Lathe Machine main performance characteristics：
1 Machine tool bed box, headstock and tailstock, pallet etc. the binding surface between the manual scraping machine, after rigorous testing, the precision and stability of the effective guarantee machine.
2 The machine adopts high strength cast iron, copper and chromium added special materials, bed width 400mm, bed rail quenching depth 4mm, effectively improve the wear resistance and stability of machine tool.
3 Machine tool bed box lubricated system by the use of the lubrication of the pump for lubrication, for the hot weather, to ensure the cleanliness of the bed box and heat dissipation characteristics, effectively extend the bearing and gear life.
4 Machine tool spindle using Wafangdian bearing, spindle hole diameter 52mm, the precision grinding machine tool gear, effectively improve the hardness, reduce machine noise.
5 Machine tool uses the domestic brand screw, wire mother uses the high quality bronze alloy to guarantee the wear resistance and the accuracy retention.
6 Machine tool with four position high strength tool, shank size: 25x25mm.
CA6180 Horizontal Lathe Machine Application：
1 CA series of ordinary horizontal lathe is suitable for turning inside and outside cylindrical surface, conical surface and other rotating surface, turning various metric and inch, modulus and pitch thread, and can carry out the work of drilling and pulling oil groove, is a very versatile horizontal lathe, widely used in all kinds of shaft and disc parts of the batch processing.
2 This series of lathe bed width in general lathe, rail width 400mm has a high stiffness; guide rail surface is quenched by medium frequency, and is durable.
3 The machine operation is flexible and concentrated, the apron with fast moving mechanism. Using single handle vivid of the operation, pleasant and good.。
4 Machine tool structure rigidity and transmission rigidity are higher than the general lathe, the power utilization ratio is high, is suitable for the strong cutting.
5 Machine tool factory in strict accordance with the test procedures for testing, and make a strong cutting test, to ensure that the machine has a good accuracy and reliability.
CA6180 Horizontal Lathe Machine main technical specifications:
CA6180 CA6180B CA6180C
Max. Swing over bed
Max. Swing over carriage
Max. length of work piece
Width of bed
Section of turning tool
Hole through spindle
52mm. （80mm）. [105mm]
NO.6（MT6）（Φ90 1：20）[Φ113 1：20]
Number of feeds
64 kinds（for each）
Range of metric threads（kinds）
Range of inch threads（kinds）
Range of module threads（kinds）
Range of pitch threads（kinds）
Max. tail stock spindle travel
Tail stock spindle diameter
Taper of tail stock spindle center hole
Packing dimensions (L*W*Hmm)
Overall dimensions for750mm
Overall dimensions for1000mm
Overall dimensions for1500mm
Overall dimensions for2000mm
Overall dimensions for2200mm
Overall dimensions for3000mm
Overall dimensions for4000mm
Weight for 750mm
Weight for 1000mm
Weight for 1500mm
Weight for 2000mm
Weight for 2200mm
Weight for 3000mm
Weight for 4000mm