ايميل: amy@gskequipment.com

هاتف.: +86 151 6326 5369

موديل المنتج:

C5123D Vertical Lathe Machine

المعلمات التقنية الرئيسية للمنتج

C5123D Vertical Lathe Machine Lathe Features:

1. This lathe is apply to machining. Rough and finish machining of inside&outside cylindrical surface, circular conical surface end face.

2. Worktable main spindle adopts high precision and adjustable radial clearance biserial short cylindrical roller bearing to centering. Axial direction adopts CC hydrostatic guideway , worktable have the features of high running accuracy ,big bearing capacity, small thermal deformation

3. Pedestal, worktable, lathe body and crossbeam castings are use gray cast iron by tempering, relieving of internal stress and non-deformation, so they are high strength, fine wear-resisting property.

4. The vertical tool post have two form,  spuare ram and manual pentagon turrets. Side tool post is equipped with square turrets, two tool posts all use hydraulic balance

5. The lathe main spindle drive is drive by AC motor, 16 steps main spindle speed change mechanism to achieve the worktable range of speed

6. According to user needs, can increase the digital display, electric grinding head and the attachment for turning taper, slide parts all auto lubrication

7. Vertical column, cross beam guideway all use high-frequency quenching, and quenching hardness is HRC48-55


C5123D Vertical Lathe Machine Technical Parameter: 


specificationsUnitC5123D
1Max. worktable diametermm2000
2Max. turning Diametermm2300
3Max. height of workpiece  mm1350
4Max. weight of workpiece  T8
5Height of tool bar sectionmm40x40
6Max. cutting force of rail headN25000
7Worktable maximum torqueN·m32000
8table speeds Step
16
9Range of table speedsr/min3.2-100
10Tool holder feed steps
12
11Range of tool holder speedsMm/min0.8-86
12Horizontal travel of railheadmm1300
13Ram travel of rail headmm800
14Swivel of rail head
±30°
15Side tool holder Horizontal strokemm630
16Side tool holder vertical strokemm900
17Rapid traverse of tool headmm/min1550
18Max travel of cross railmm820
19Elevating speed of cross railmm/min350
20Main motor PowerKw30
21Beam lifting motor powerKw2.2
22Machine weightT18
23Overall dimensionsmm3900*2950*4200