ايميل: amy@gskequipment.com

هاتف.: +86 151 6326 5369

موديل المنتج:

Q1322 Pipe Thread Lathe

المعلمات التقنية الرئيسية للمنتج

Q1322 Pipe Thread Lathe main performance characteristics:

Big spindle bore and double chuck allows clamp and process big diameter pipes;

Integral machine bed adopts high strength iron to relize high rigidity and precision;

Ultrasonic frequency quenched guide-ways are hard enough for good wear-resistance;

Equiped with taper guide bar device this enables the machine to process taper threads.


Q1322 Pipe Thread Lathe Application:

Q1332 horizontal pipe threading lathe machine is mainly used for turning the internal and external threads including metric and inch thread,as well as having all the common functions of normal engine lathe such as processing the inner bore and end face of shafts and disks,this machinery is equipped with taper guide bar device which enables this series to process taper thread.

This series lathe machine is widely used in industries including petroleum exploiting ,coal and minerals mining,chemical piping and geological prospecting,it is high-efficiency equipment in processing and repairing drilling pipe,drilling rod,thread coupling and so on.


Q1322 Pipe Thread Lathe Standard accessories:

Tool post,Tailstock,Chuck,taper guide bar,Lighting lamp,Coolant pump,Rear support bracket,Pad iron etc.


Q1322 Pipe Thread Lathe Optional accessories:

Digital readout,Chuck,Faceplate,Chasing dial,Center rest,Signal light,Protective cover(lead-screw,chuck,tool post),and Grinding attachment etc.


Q1322 Pipe Thread Lathe Main Technical Parameters:


SpecificationsUNITQ1313Q1319Q1322
CapacitySwing over bedmm630/800630/800630/800
Swing over cross slidemm340/540340/540340/540
Distance between centersmm1500/30001500/30001500/3000
Pipe threading rangemmØ30-126Ø50-193Ø50-220
Width of bed waymm550550550
Max.load capacityT333
SpindleSpindle boremmØ130Ø200Ø225
Spindle speed steps-FWD. 18/REV. 9FWD. 12/REV. 6FWD. 12/REV. 6
Spindle speed rangerpm12-642/19-80024-300/38-38424-300/38-384
Chuck sizemm400520520
Chuck type-3-jaw manual4-jaw manual4-jaw manual
TurretTurret type-Manual 4 positionManual 4 positionManual 4 position
Tool shank sizemm32x3232x3232x32
Turret travelmm200200200
CarriageX axis feed grade/rangemm/r22/0.02-0.4522/0.02-0.4522/0.02-0.45
Z axis feed grade/rangemm/r26/0.07-1.3326/0.07-1.3326/0.07-1.33
X axis rapid traverse speedmm/min230023002300
Z axis rapid traverse speedmm/min400040004000
X axis travelmm320320320
Z axis travelmm1310/28101310/28101310/2810
TailstockTailstock quill diametermm100100100
Tailstock quill taper-MT#5MT#5MT#5
Tailstock quill travelmm250250250
MotorsMain spindle motorkW7.57.57.5
Rapid traverse motorkW0.30.30.3
Coolant pump motorkW0.1250.1250.125
ThreadMetric thread grade/rangemm52/1-2424/1-1424/1-14
Inch thread grade/rangeT.P.I.40/2-2840/2-2840/2-28
DimensionsWidth x Heightmm1360X14801360X15551360X1555
Lengthmm3657/51573657/51573657/5157
WeightN.W./G.W.T3.8/4.64.2/5.054.3/5.15